Even if you buy Shower Products with quality and quantity guaranteed, after a long time of use, its interior may be blocked due to the influence of scale. At this time, you need to use appropriate treatment methods to eliminate the phenomenon that the shower cannot be used normally due to blockage. So how to deal with the blockage of shower?

1. With Acupuncture
If it is found that the blockage of the shower is only a small part, not completely blocked, but the water flow is smaller than usual. For example, if some small holes do not flow out, you can discharge water first, and then pierce the small holes that do not flow out with a needle, so as to eliminate the impurities existing in the small holes, so as to solve the problem of partial blockage.

2. Soak in vinegar
If the shower is blocked in a large area, most of the holes in the shower are blocked. If you pierce the impurities one by one with a needle, it will be more troublesome. At this time, you can prepare some white vinegar, pour the white vinegar into the basin, and then place the shower head in the basin for soaking for about ten minutes, and then open the large water pipe, Then you can wash out the scale and impurities in the shower.

3. Rust remover
If the metal shower is rusted due to material problems, resulting in blockage, you can also choose to use rust remover at this time, and use the good permeability of rust remover to remove rust. After removing rust, put more water for flushing.

In short, if the shower with novel design is blocked, the above methods can be used for treatment. However, it should be noted that strong acid substances cannot be used when removing scale, otherwise it may cause corrosion to the surface of shower. At the same time, do not use hard objects such as steel ball to wipe the surface of shower. In order to keep the shower away from blockage as much as possible, we should develop the habit of maintenance and throw the shower after each bath, and then wipe the water outlet of the shower with a towel or soft cloth.